What to do if a belt is too long?

A great thing to do when a belt is too long is to use little elastic bands or ‘rainbow looms’ matching the color of your belt. Before putting on the belt put on the elastic bands to the side of the belt that has the buckle at its end.

The easy way to shorten a belt is just to cut it off at the end with the holes, but what if you like the tail as it is? With most belts, you can also shorten them from the buckle end, preserving the finish of the tail. It’s only very slightly more work.

One may also ask, how do you cut belt size? FOUR EASY STEPS

  1. Place the buckle through the middle hole of the belt.
  2. Wrap the belt around your waist to get the appropriate length.
  3. Cut the belt with scissors on the square end, not the end with the buckle holes.
  4. Insert the cut end of the belt into the buckle and clamp it down.

Also know, how far should a belt stick out?

Usually, standard belts have five holes, one inch apart each, but some manufacturers may use six or seven holes. In each case, there is one rule applied: A 34-inch belt should measure 34 inches from the far end of the prong which is shafted in the center of the buckle, to the center hole.

Does Gucci punch holes in belts?

ADDING HOLES TO YOUR GUCCI MARMONT BELT * Have your Gucci store add them for you for free. * Get yourself an inexpensive tool (the same one that the cobbler uses) and add as many holes to as many belts as you like. The tool is called Revolving Punch Pliers or Leather Hole Punch Tool.

What is the best tool to cut a leather belt?

You can also use pro super shears for cutting pointed belt tips or for trimming the length of a belt. Softer leathers such as garment leather stretches easier and therefore it is easier to cut it with super shears as opposed to a utility knife.

How do you get a belt to stay on without a belt loop?

One would be to tighten your belt above the waist, so that it is resting on your hip bones. If the diameter below your belt is greater than the diameter you have set your belt to be, then it cannot slide down. Another way would be to utilize a unique belt that works even without belt loops.

How do I keep my pants up without a belt loop?

Buy Jeans With an Elastic Band There are even jeans made of denim and elastic fabrics that feature an elastic waistband without belt loops. The purpose of this elastic waistband is to eliminate the need for wearing a belt. With its elastic construction, the waistband will stretch to comfortably fit around your waist.

Can you wear a belt without belt loops?

A belt will hold the scarf in place and give your outfit a pop. You don’t need belt loops for this look and belt loops on pants are necessary either. make it look more expensive and highlight the waist, a belt is the finishing touch you need especially in a contrasting color.

How do you poke a hole in a belt?

Keep your belt stretched firmly (you can hold one side of the belt under you foot, and the other side with one of your hand, while the other hand is holding the pliers) and point the nail to the spot you want to make a hole, and push into the belt. It makes a small regular hole very easily.

Why does my belt fold in the back?

The short answer is the belt is molding to your body style. It is perfectly normal for a curve to develop in his belt and again makes the belt fit better and comfortably. You will also see bends and indentations in the belt where it contacts belt keepers.

How far should a belt extend past the buckle?

Avoid wearing a belt that is shorter than your waist or more than 2 sizes bigger than your waist. The appropriate belt length is such that it goes under the first belt loop after the buckle and should go under the second belt loop.