How much is a brake job at a dealership?

The average is typically around $60 to $100 per hour. Brake jobs are usually priced at anywhere from 1-2 hours per axle (sometimes 3 for the most comprehensive jobs) worth of labor based on a flat rate pay system. The costs can add up if you need both your front and back brakes repaired.

The average brake pad replacement cost is $150 per axle, and can range from $100 per axle up to $300 per axle. There are a few other pieces of hardware that are found in the brake system which might need to be serviced as well, including calipers and rotors, but the most common service will be to replace brake pads.

Also, how much should it cost to replace brake pads and rotors? Average Brake Pad Replacement Cost

Pads & Rotors Cost Range
Rotors (Parts) $30 to $75 each
Pads (Parts) $35 to $150
Labour $150 to $200
Total $250 to $500 per axle

In respect to this, how much do dealers charge to change brakes?

Depends on if you’re willing to do it yourself or not. Most dealerships and shops charge “per axle” for brakes, usually around $260-$300, giving a total of $520-$600 for all 4 corners.

How much does it cost to replace all 4 brake pads and rotors?

That said, for brake pad replacement only, you can expect to pay between $35 and $150 for parts for all four wheels. Labor typically runs between $80 and $120 per axle, making for a grand total of between $115 and $270 per axle. Replacing rotors with your brake pads is critical for best braking and maximum safety.

How long does a brake job take?

The type of car brake service you need is the best indicator of time requirements. Simple jobs like a brake pad replacement can take anywhere from 15 minutes to an hour. The time it takes for a repair also depends on which type of vehicle you have and what parts the shop has on hand.

How do u know when u need new rotors?

It could represent four signs that it’s time to replace your brake rotors. Vibrating Steering Wheel. If you feel pulsing in the brake pedal and vibration in the steering wheel when you slow down, your rotors could be signaling trouble. Intermittent Screeching. Blue Coloration. Excessive Wear Over Time.

Can I just replace brake pads and not rotors?

When To Replace Brake Rotors Maybe not every time. In fact, some manufacturers recommend simply replacing the brake pads themselves without resurfacing or replacing the rotors, as long as the rotors measure more than the minimum thickness and they spin true (are not warped).

Can I change brake pads myself?

While it might seem intimidating, changing your brake pads is a ridiculously easy process that nearly anyone can do with the right tools. Once you get used to doing it, you can replace your brake pads in an hour or so. Not to mention, you can save hundreds of dollars over the long run by doing the job yourself.

How much do new rotors cost?

The average cost for a brake rotor replacement is between $406 and $559. Labor costs are estimated between $158 and $200 while parts are priced between $248 and $359. Estimate does not include taxes and fees.

Should you replace all 4 brake pads at once?

The short answer is that you can replace your brake pads in pairs (front or rear) as necessary, but don’t have to replace both sets at the same time unless they both need it. The reason for this is that your front brakes actually do most of the work.

Should I replace all 4 rotors?

As long as you have both front disk brake pads replaced and rotors turned or replaced as well, it should be fine to complete the rear brakes shortly after. Although it is recommended by Ford to replace all four wheel brakes at the same time for safety, your idea should be OK.

How long will 1 mm of brakes last?

Brakes are a lot like tires The brake pads usually start with 11mm. You have 4mm left (replace point is 3) so you have used 7mm in 33k miles. At your rate it will take 33/7 or about another 5K miles to wear another 1mm.

Are rear brakes more expensive than front?

Unfortunately, our world is festooned with imperfections, and higher prices for rear brakes just happens to be one of them. If you have rear disc brakes, this repair (with just the standard pad/rotor replacement) will run $25-$75 higher than the front brake repair, on average.

Is Firestone cheaper than dealer?

Firestone offers competitive pricing for the auto and vehicle repair services they offer. Firestone can offer all of the services that GM owners do, for instance, receive goods through GM Goodwrench repair shops. The cost of the repairs done at a Firestone will be less than those repairs done at the dealership.

How long do rotors last on average?

The rotors on a vehicle can last anywhere from 30,000 to 70,000 miles and sometimes more. A licensed mechanic, such as one from YourMechanic, can evaluate the rotors and advise you on their status; they may not need to be changed as often as the brake pads. Like brake pads, they should be replaced in pairs.

How much should a rear brake job cost?

Back to how much a brake job should cost But typically, OEM or premium quality brake pads or shoes cost around $40 to $100 per axle (both front wheel or both rear wheels), depending on the year, make and model and whether they’re for front or rear wheels. The average brake job takes about an hour to perform.

Is brake check expensive?

Most dealerships charge up to $40 just for an routine inspection of your brakes. One popular chain store offers a free brake check with the following conditions: It’s free ONLY if you subsequently have to make repairs to your brake system.

Do brakes need to be serviced?

Brakes also need to be inspected and serviced (or replaced) if they are not working properly, squeak, grind or produce other abnormal noises, or if the brake pedal doesn’t feel “right.” The benefits of servicing brakes are that the brake pads or shoes wear more evenly and last longer and the brakes are less likely to