How can I make my Primo Water Cooler colder?

The cold water thermostat control is mounted onto the back of your Primo water dispenser. First, unplug your water dispenser from the electrical outlet. You do not want to adjust this more than one-quarter of a turn as turning it too much might cause the water to freeze.

The cold water thermostat control is mounted onto the back of your Primo water dispenser. First, unplug your water dispenser from the electrical outlet. You do not want to adjust this more than one-quarter of a turn as turning it too much might cause the water to freeze.

Additionally, how long does it take for a water cooler to get cold? It takes 10-12 minutes to chill drinks in a cooler if they are covered in ice. If they are submerged in ice water it takes just 4-6 minutes to cooler them down.

Also know, why is my primo dispenser not cooling?

Unplug the dispenser, open the drain plug on the back and remove water from the hot reservoir. Empty the cold reservoir by dispensing water from the cold tap at the front of the dispenser. Leave the dispenser unplugged and dry until you are ready to begin use.

How do I reset my water cooler?

To do a reset, drain a few cups of water out of both the hot and cold sides of the water cooler. Then turn the switches in the back of the cooler off. Unplug your water cooler, and leave it unplugged for 24 hours. When you do turn it back on, be sure to turn the back switches on as well.

How do you fix an airlock in a water cooler?

It is possible that an airlock has occured in the internal pipework in the cooler. To resolve this we recommend simply lifting the bottle of top of the cooler up above the cooler and then replacing it back in position. Then squeeze the bottle gently using a ‘hug’ type grasp.

Is Primo Water Safe?

The resulting drinking water is highly purified, great-tasting healthier drinking water free of potentially harmful impurities. But… the additional filtration of reverse osmosis, used in Primo water, filters out many of the remaining microscopic organisms and heavy metals in tap water.

Do water dispensers need to be cleaned?

The U.S. Department of Energy recommends cleaning the cooler with every change of the bottle, or every six weeks, whichever arrives first. Keeping the water clean is the most important part of maintaining your cooler. Fortunately, washing your dispenser requires only some time, water, and either bleach or vinegar.

Why is my Primo water dispenser red light blinking?

A flashing red function light alerts you when your bottle is empty. Replace the bottle as soon as possible. CAUTION: Do not dispense hot, cool or cold water if the red light is flashing as you could empty the tanks and cause the dispenser to overheat.

How much electricity does a primo water dispenser use?

Answer: If I calculate correctly, then at $2.00 per day, what you are saying is that your electricity consumption for using the Primo water dispenser costs approximately $60.00 per month.

How do you get the coldest water?

Whats the best way to get the coldest water? Fill an empty water bottle about 1/3 full of water. Give the bottle a little squeeze and put the cap on. Place the bottle in the freezer either on its side or with the cap slightly elevated. Wait. Fill the bottle with water. The ice will keep the water deliciously cold.

How much does a primo water dispenser cost?

5-Gallon Average $6.99. *Price after return bottle rebate. First bottle purchase may cost up to $14.99.

How do I adjust the thermostat on my water dispenser?

1-2). To make the water colder, rotate the screw in the clockwise direction approximately 1 hour position. Allow the cooler to stabilize for 2-3 hours to ensure proper temperature of the cold water. (Note: do not change the setting by more than 1 hour setting at a time to prevent freezing).

How do I fix my hot water dispenser?

If the water coming from the dispenser is too hot, you can solve this by changing and setting temperature of the unit’s thermostat. If it has poor pressure, then there could be an obstruction in the coming water. It is recommended that you check if the valve is open properly. Check the outlets and the power settings.